Gold Stock Investor News – Lion One (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) Reports 19.60m at 21.16 G/t Au Including 16.20m at 25.28 G/t Au in Drillhole TUDDH-608, Expanding the TUG-141 High-Grade Zone at Tuvatu, Fiji
North Vancouver, British Columbia – September 15, 2022 (Newsfile Corp.) (Investorideas.com Newswire) Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce the results from drillhole TUDDH-608 a direct follow-up to the TUG-141/TUDDH-601 high-grade zone discovery at its fully permitted Tuvatu Alkaline Gold Project in Fiji.
19.60m at 21.16 g/t Au from 594.5-614.1m, which includes a zone of
16.20m at 25.28 g/t Au from 596.7-612.9m.
The dip of this hole at this depth was approximately 60? equating to a true horizontal width of 11.85m.
TUDDH-608 was drilled from surface at an azimuth of approximately N090?E, aimed at intersecting the TUG-141/TUDDH-601 high-grade zone at a high angle to determine the true width of the high-grade zone at this location.
Figure 1 show the trace of TUDDH-608 and its location relative to the current interpretation of the TUG-141/TUDDH-601 high-grade dilation zone, and indicates that TUDDH-608 intersected high-grade Au mineralization approximately 20m north of subvertical hole TUDDH-601, and 15m below the discovery hole TUG-141. The trace of the currently drilling TUG-147 drillhole, designed to intersect the high-grade mineralized zone an additional 90 to the north of TUDDH-608 is also shown on Figure 1. TUG-147 is expected to cross the target rocks in the next 7-10 days.
Figure 2 includes some photos of the mineralization intersected by hole TUDDH-608. All results >0.5 g/t Au are summarized below in Table 1.
Lion One Sr. Vice-President of Exploration Sergio Cattalani, stated “This is yet another exceptional set of results from the ongoing drilling of the high-grade zone defined by the previous drill holes TUG-141 and TUDDH-601. Our current interpretation of this portion of the 500 Zone feeder is that of a wide zone of dilation associated with the interplay of major structural corridors (UR1 and UR4) and the main lithological contact between monzonite and andesite that has the potential to extend for tens to hundreds of meters both vertically and along the NS direction. True widths exceeding 10m at the narrower apex of this dilational zone suggest a significant increase in gold ounces once this zone has been adequately drilled off, and this, independent of the rest of the extensive vertical 500 zone feeder that is known to exceed 1100m in vertical extent. We will continue to expand this critical zone of high-grade mineralization with ongoing drilling both from surface as well as from the underground decline.”
Figure 1: Oblique views looking N320? and down 45? (A) and looking N060? and down 20? (B) of a 100m thick horizontal slice of the UR1-UR4 high-grade mineralized zone. Yellow trace is the projected trace of TUG-147 (in progress).
Figures 2: Photos from TUDDH-608 drill core, as follows: A) 571.5m, 17.03 g/t Au; B) 601.9m, 23.21 g/t Au; C) 599.5m, 108.31 g/t Au; D) 606.5m, 54.54 g/t Au; E) 611.8m, 45.02 g/t Au; F) close-up of cut core from photo E showing VG.
In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.
Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analysed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analysed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. For samples with multiple fire assay runs, the average of duplicate runs is presented. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analysed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).
About Lion One Metals Limited
Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.
On behalf of the Board of Directors of
Lion One Metals Limited
Chairman and CEO
For further information
Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release.
This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
Read Today’s Top News Story on Investorideas.com
Artificial Intelligence in Insurance – Stocks to Watch (OTC: $LZGI) (NYSE: $DWIN) (NASDAQ: $INTC) (NYSE: $LMND)
Vancouver, Kelowna, Delta, BC – September 15, 2022 (Investorideas.com Newswire) Investorideas.com, a leading investor news resource covering technology and AI stocks releases a special report covering the growth in AI technology utilization in the insurance industry, featuring FatBrain AI (LZG International Inc.) (OTC: LZGI).
This news is published on the Investorideas.com Newswire – a global digital news source for investors and business leaders
Disclaimer/Disclosure: Investorideas.com is a digital publisher of third party sourced news, articles and equity research as well as creates original content, including video, interviews and articles. Original content created by investorideas is protected by copyright laws other than syndication rights. Our site does not make recommendations for purchases or sale of stocks, services or products. Nothing on our sites should be construed as an offer or solicitation to buy or sell products or securities. All investing involves risk and possible losses. This site is currently compensated for news publication and distribution, social media and marketing, content creation and more. Disclosure is posted for each compensated news release, content published /created if required but otherwise the news was not compensated for and was published for the sole interest of our readers and followers. Contact management and IR of each company directly regarding specific questions.
More disclaimer info: https://www.investorideas.com/About/Disclaimer.asp Learn more about publishing your news release and our other news services on the Investorideas.com newswire https://www.investorideas.com/News-Upload/ and tickertagstocknews.com